Capacitance Probe, High Temperature and Pressure Service, Slotted Tubular Ground for Interface Service
The Delta Controls Model P26 Capacitance Probe is intended for high temperature/pressure chemical processing and steam/slurry applications. It is also greatly resistant to corrosion and is equipped with triple sealing for utmost safety and reliability.
The P26 has vertical slots milled into the tubular ground reference. These slots are offset and overlapping so that the interface liquids are always free to flow in or out. This is a necessity when used for interface service. The interface transition zone must be kept close to the sensing rod by a solid tube wall.
Features
- For high temperature and high pressure services
- Slotted ground reference provides accuracy in interface service
- High inherent gain sensitivity
- Allows full scale calibration over a modest change and narrow ranges
- Allows full scale calibration over a modest level change and narrow ranges
- Works with liquids carrying entrained solids and low dielectric constant
- Insensitive to surface turbulence
- Built-in ground reference improves sensitivity
- Linear output signal in irregular tanks
- Allows calibration to be done outside the vessel
- Strong and resists flowing currents, waves, vortices
Specifications
- Working Pressure: ≤ +650 psig (+44.8 bar)
- Working Temperature: ≤ +750 °F (+399 °C)
- Insertion Length:≤ 10 ft (3 m)
- Process Connection: 2.0 MPT minimum
- Threaded Process Connection: 2.0 in
- Flanged Process Connection: ≥ 2.0 in
- Flange Rating: ≤ 600 lb
- Available Wetted Materials: 316 Stainless Steel, PTFE, carbon steel
- Ground Sheath:316 Stainless Steel (other materials available)
Required Ordering Information
- Detailed model number
- Tag or nameplate detail (if required)
- Documentation & testing packages (if required, refer to Additional Resources in the product catalog)
- Process fluid or material name
- Process fluid or material dieletric constant
- Maximum process temperature
- Maximum process pressure Upper and lower materials required for interface service