Series 60

SKU: 60

Tilt Probes, For Use With Model 835

Type 60 Type 60 Probe Applications for Model 835 Tilt Switch - Delta Controls Gen’l Purpose For Most Solids
Type 61 Type 61 Probe Applications for Model 835 Tilt Switch - Delta Controls For Moving Solids, E.G. Conveyors
Type 64 Type 64 Probe Applications for Model 835 Tilt Switch - Delta Controls For Liquids & Powders
Type 65 Type 65 Probe Applications for Model 835 Tilt Switch - Delta Controls For Dense and Viscous Slurries
Type 66 Type 66 Probe Applications for Model 835 Tilt Switch - Delta Controls For Water and Thin Liquids
Option HB Option HB - Probe Applications for Model 835 Tilt Switch - Delta Controls Support For All Bail or Cable Supported Probes

Rod type probes are typically the best choice for lump, granulated, or powdered solids. The Type 60 is the best choice for most level detecting jobs. A Delta Controls Type 64 is usually required when the density is low or the material is an aerated powder.

A Delta Controls Type 61 paddle end probe is a good choice for most moving material detection needs. The large sensing area provides high sensitivity and is less affected by voids. Stainless steel bail material is basic and is suitable for most services. Use all stainless probes when the area is wet or corrosive. Polished all stainless is required for 3A sanitary services.

Slurries and liquids vary from extremely heavy and viscous to thin and watery. The Delta Controls Type 65 works well on heavy slurries.

The Delta Controls Type 64 and 66 are normally needed when the material is a clean liquid or is a liquid with entrained solids.

The Delta Controls Types 65 and 66 are cable suspended and do not have bails. They can be cable suspended if the surface is calm and still. The option CH and support pipe should be added if ripples, roiling, or surface choppiness are present.

Specifications

  • Tilt Sensor: Liquid drop inside a welded steel chamber; has a second safety seal; 1 Amp rating
  • Tilt Angle Sensed: 15° away from vertical in any direction, no additional action occurs during a global tilting of the probe.
  • Temperature Limits: -40°F to 220 °F
  • Wetted Materials: Stainless Steel, nylon, PVC, PVDF (Kynar®), and exotic metals
  • Probe Cable: Oil resistant rubber insulation and jacket, flexible 41x34 stranded copper, 18 gage

Applications

Rod type probes are typically the best choice for lump, granulated, or powdered solids. The Type 60 is the best choice for most level detecting jobs. A Type 64 is usually required when the density is low or the material is an aerated powder. A type 61 paddle end probe is a good choice for most moving material detection needs. The large sensing area provides high sensitivity and is less affected by voids. Stainless steel bail material is basic and is suitable for most services. Use all stainless probes when the area is wet or corrosive. Polished all stainless is required for 3A sanitary services.

Slurries and liquids vary from extremely heavy and viscous to thin and watery. The Type 65 works well on heavy slurries. The Type 64 and 66 are normally needed when the material is a clean liquid or is a liquid with entrained solids. Types65 and 66 are cable suspended and do not have bails. They can be cable suspended if the surface is calm and still. The type HB hanger kit and support pipe should be added if ripples, roiling, or surface choppiness are present.

Accessories and Related Products