Delta Controls Home Page

SERIES 600
HIGH RELIABILITY FLOW SWITCHES, FLOW DETECTORS, PIPELINE INTERFACE DETECTORS

For Use In Critical Industrial Applications

Download the Series 600 Datasheet

Delta Controls Mechanical target type flow switches

  • Precalibrated for your desired switching point.
  • Proven in critical high reliability service for over 25 years
  • No external supply power required
  • Simple in principal, very reliable, and easily tested
  • No seals, magnetically coupled; fireproof, leak proof, reliable
  • Model 633IF electronic version detects interface in a pipeline
  • Model 633ED can determine whether a pipeline contains gas, hydrocarbins, water or a mixture
  • Most series 600 are used to monitor the flow of gases, chemicals, hydrocarbons, or water in services where a failure to switch properly could be serious or even catastrophic. e.g. fire water flow, safety shower and eye wash operation
  • Service: -40 to 450° F (-40 to 230° C) -15 to 5000 PSIG (-1 to +345 BAR)

SUMMARY OF MODELS AND STYLES

Model 622

Delta Controls Model 622 -- Inserted into 1" to 60" (40 to 1500 mm) pipelines and ducts. Inserts through a welded on branch fitting pipeline tee or flange. Used in general purpose service for detecting loss of adequate flow, or for alarming excessive flow.

Model
621

Delta Controls Model 621 – Inline body, general purpose for " to 8" (12 to 200mm) pipelines; full bore body mounts in pipeline; threaded, flanged or butt weld pipeline connections; for general purpose service; built to ANSI, ASME, and PED specs.

Model
623

Delta Controls Model 623– For detecting flow in personel showers and eye wash stations. It also works well in low flow chemical and corrosive services; detects very low flows (<1 gpm) yet still has a modest drop at 50 times that flow rate.

Model
624
Delta Controls Model 624 – Negligible pressure drop at high velocities for 2" through 8" (50 to 200mm) pipelines; similar to 621, except target swings a full 90° and provides an unobstructed line bore.

Model
626

Delta Controls Model 626 For detection of sea water flow in offshore deluge fire control system

Model
627
Delta Controls Model 627 Detects very low flows in larger pipelines, no pressure drop for 2" through 8" pipelines; full swing target; General Purpose
Model
625

Delta Controls Model 625 Detects ultra low flows for 1/8" through 1" pipelines; for detection additives, oiling, purging, etc. low pressure drop at 35 times detected flow rate; field adjustable.

Model
633

Delta Controls Model 633IF - Detects an interface as it moves down a pipeline

Delta Controls Model 633ED Detects whether a pipeline is empty or full; Model 633AN determines what a pipline contains; gas, oil, water or a mixture. Trying to sense these conditions with a target or other type flow switch can give erroneous results, causing spills, process shutdowns, etc.
 

Data Sheets
By Model Number

Contact Delta Controls

   
Delta Controls Home Page
Y

<target>