Delta Controls Home

MODEL P72 FLEXIBLE CABLE PROBE

EQUIPPED WITH PARALLEL GROUND CABLE;
FOR USE WITH LIQUIDS ONLY

Download the Delta Controls Model P72 Detailed Datasheet 
Note: You will need the Acrobat Reader to view the data sheet. 


Features
· Cable can be coiled for easy handling and shipment
· Easily installed in tall tanks
· Can be installed in indoor tanks with low headroom
· Can be used in horizontal cylindrical tanks and others without a flat single plane wall
· Corrosion resistant PTFE Teflon® seals and jacket
· Suitable for high pressures and temperatures
· Available in 316 S.S. or Hastelloy® "C"

Application
The Delta Controls Model P72 is needed when a large tank has nonlinear tank walls such as does a horizontal cylinder or a sphere. It also is used where indoor tanks only have limited headspace above them. Most applications require the optional bottom weight to keep the cable taut.


The Delta Controls Model P72 probe is a Model P71 to which a parallel ground reference cable has been added. Many nonconductive liquids have low dielectric constant values. It is important that the rangeability tables be consulted and followed to insure adequate intrinsic gain of the probe. A parallel ground cable will usually solve rangeability problems in large tanks of low dielectric liquids. The P72 should generally be used when the level change is less than ten (10) feet, where the tank diameter is greater than eight (8) feet, or when the measured liquid has a low dielectric constant (less than 3.5 units). Low dielectric liquids include fuel oil, gasoline, benzene, and liquefied petroleum gasses. The Delta Controls Model P72, with parallel ground cable, is required when the tank has a nonlinear ground reference wall, such as is found in a horizontal cylindrical tank or an LPG sphere. This probe is not suitable for service in powders or solids.

Specifications
Working Pressure: 1500 PSIG (100 BAR) at 100°F (40°C)
Working Temperature: -460 to +400°F (-273 to +200°C)
Temperature Extension: Required for less than -20°F (-30°C) or higher than 175°F (80°C)
Insertion Length:
Up to 250 feet (75 meters)
Process Connection:
MPT is basic, flanged (any type) is optional
Electronic Module: Compatible with all Delta Controls Models
Wall Mount Support Bracket: Optional
Lower Fitting: 1½-12T bolt
Lower Weight: Optional


Go to Delta Controls Home Page

Delta Controls Home
<p72>