MODEL P66 R. F. ADMITTANCE PROBE

FOR ULTRA PURE AND METAL ION FREE APPLICATIONS

Download the Delta Controls Model P66 Detailed Datasheet 
Note: You will need the Acrobat Reader to view the data sheet. 

Features

• Only virgin Polypropylene or FDA approved natural Kynar® comes into contact with the process fluids
• Thick plastic jacketing is welded in place
• No cracks, joints, or crevices to collect contaminants
• Suitable for fluids used in silicon chip and electronics manufacturing
• For industrial processes which are extremely corrosive such as hydrofluoric acid plants, pickling lines, and plating solutions
• Plastic surfaces are flame smoothed for the best available surface
  

Application

The Delta Controls Model P66 sensing probe has all plastic wetted parts. It is designed for use in processes and storage tanks where the possibility of contamination cannot be allowed. Some process examples are injectable solutions, pharmaceutical dilution fluids, heavy water for research, electronic chipmaking, and high quality plating systems.

The P66 also commonly finds application in industrial process systems which are extremely corrosive. Kynar® (PVDF) is very inert and unaffected by almost all strong acids and bases below a temperature of 275°F (135°C). Applications include hydrofluoric acid level, refinery hydroformers, bromine condensers, chlorine generation cells, radioactive processes and wastes.

Specifications

Working Pressure: -15 to +300 PSIG (-1 to +21 BAR)
Working Temperature: -40 to +300°F (-40 to +150°C), note that W.P. decreases as temperature increases.
Insertion Length: Up to 10 feet (3 meters)
Process Connection: 2"/150# R.F. ANSI flange; other types and sizes optional
Wetted Materials: Kynar® (PVDF) or Polypropylene
Body and Support Parts: 316 Stainless Steel basic
Electronic Module: Compatible with all Delta Controls Models
Process Temperature Sensing: Optional -125 to +250°F (-80 to +122°C); 4-20 mADC output signal over a second 4-20 mA loop

Go to Delta Controls Home Page

<p66>