Download the Delta Controls
Model P62 Detailed Datasheet 
Note: You will need the Acrobat Reader to view the data sheet. 
Features
· Only FDA approved natural
Kynar® and polished 316 S.S. come into contact with the process fluids
· Concentric ground reference tube provides a linear output in horizontal cylindrical
tanks
· Used where agitation causes problems
· Easily cleaned manually, in-place, or by steaming
· Basic process connection mates with Ladish Tri-Clamp® sanitary flange
· 3A authorized and listed sanitary sensor
· Suitable for pharmaceutical industries
· Works with conductive liquids
· Suitable for very low dielectric liquids such as wax, grease, and pure oils
· Can be used to measure interface position
Application
The Delta Controls Model P62 is essentially a Model P61 which has been equipped with a concentric ground reference tube. The P61 inner portion is connected to the reference tube using a tri-clamp sanitary flange. The inner unit is easily removed from the outer ground reference tube for cleaning or inspection. The concentric shield is mounted to the process vessel by a second tri-clamp sanitary flange. It can be left in place while the inner portion is withdrawn. The reference portion can then be removed as required. The Kynar® (PVDF) sensing rod/seal jacket is a single piece welded part, without joints, cracks, or crevices. The finished unit is flame polished for the utmost in smoothness and cleanability The ground reference tube is made of 316 S.S. and is polished both internally and externally. The integral ground reference allows the P62 to be used in plastic tanks and in lined tanks which do not provide the necessary ground reference.
Specifications
Working Pressure:
Up to 500 PSIG (35 BAR)
Working Temperature: -40 to +300°F (-40 to +150°C)
Insertion Length: Up to 4 feet (1.2 meters)
Process Connection: 2 inch or larger tri-clamp flange; other styles
and types optional
Wetted Materials: Kynar® (PVDF) and 316 S.S.
Body Material: 316 Stainless Steel
Electronic Module: Compatible with all Delta Controls Models
Process Temperature Sensing: Optional -125 to +250°F (-80 to
+122°C); 4-20 mADC output signal over a second 4-20 mA loop
Go to Delta Controls Home Page